• Home
  • Products
  • JOB ON A PALLET COMPLETE READY TO INSTALL SYSTEM ARMORPOXY II PER SQ FT. STD. VOC

Color has been changed to

close

JOB ON A PALLET COMPLETE READY TO INSTALL SYSTEM ARMORPOXY II PER SQ FT. STD. VOC

$1.49 - $1.79

Description

ENTER TOTAL SQUARE FEET IN QUANTITY BOX WHEN ORDERING. PRICE IS PER SQUARE FOOT. RECOMMENDED FOR INDOOR USE ONLY. Save up to 80% over a contractor-installed floor! Complete ‘Job on a Pallet’ Armorpoxy II 2-Layer, ready-to-install floor coating System. Military grade 2 layer coating system consists of everything you need to prep, apply, and install […]

Description

ENTER TOTAL SQUARE FEET IN QUANTITY BOX WHEN ORDERING. PRICE IS PER SQUARE FOOT. RECOMMENDED FOR INDOOR USE ONLY. Save up to 80% over a contractor-installed floor! Complete ‘Job on a Pallet’ Armorpoxy II 2-Layer, ready-to-install floor coating System. Military grade 2 layer coating system consists of everything you need to prep, apply, and install […]
Product code: JOPCUSTOM
Shipping Weight: .12 lbs.

Description

ENTER TOTAL SQUARE FEET IN QUANTITY BOX WHEN ORDERING. PRICE IS PER SQUARE FOOT. RECOMMENDED FOR INDOOR USE ONLY.
Save up to 80% over a contractor-installed floor! Complete ‘Job on a Pallet’ Armorpoxy II 2-Layer, ready-to-install floor coating System. Military grade 2 layer coating system consists of everything you need to prep, apply, and install your floor on virtually any surface. Kits include the following: ArmorEtch concentrated etch solution, Armorpoxy II self-priming 2-part industrial epoxy, ArmorUltra Military-grade 2-part protective topcoat (pigmented, not inexpensive clear), UltraWear high wear non skid powdered metal wear additive, power mixers (for your drill), mixing bucket with liner, 18″ industrial roller frames, 18″ epoxy roller covers, spiked shoe bottoms (for walking on wet epoxy, complete instructions and full, unlimited free telephone support. Please note that other colors are available. Certain colors such as white, off white, red, and other highly pigmented bright colors are supplied with an additional coat of epoxy and will charge out at additional 29 cents/ sq ft. Please order the number of square feet of your project.

Minimum order size 1500 sq ft, orders 500-1500 sq ft 25 cents/foot surcharge.  Smaller orders may go Fedex Ground and not on a pallet for faster service. Lead time 2-3 days plus transit time. Additional colors, including all OSHA-Approved safety colors are available for base coats or line/hazard marking. Please contact us for any special requests, ‘decorative chip’ projects, high acid/chemical resistant projects, electro static dissipating, and any other type of special or unusual floor, or for floor repair special products to repair cracks and floor damage. For ‘fleck’ type floors please call us to order due to the many color combinations available 888-755-7361 9-5 EST M-F.

Please note that recent changes in VOC laws in certain states require selection of the ‘Low VOC’ option (additional 19 cents/sq ft due to higher material costs since we have to substitute the standard Armorpoxy II with the Low VOC Armorpoxy II). Current states that these laws apply to are CA, CT, DE, ME, IL, IN, MD, MA, NH, NJ, NY, OH,PA,RI,VA. If your order is shipping to one of the “Low VOC Required” states listed here we cannot legally ship the standard VOC version to any of the above-noted states so you need to order the Low VOC version, please see JOPCUSTOM-LOWVOC. Orders shipping to the states that require Low VOC will be manually adjusted and price corrected when your order is processed if the incorrect version was ordered.

Please note that the standard included coatings on this system contains ingredients which may result in traditional ‘paint smell’ while curing (2-3 days). Once cured, this odor dissipates.  If your project is being used in an area that these odors could cause concern, please contact our office to obtain a quote for a low/no odor alternative (prices will be somewhat higher than the standard system.)

 

SKU: JOPCUSTOM

Standard kits

Tile Red

Medium Gray

Off White

Dark Gray

Tan

Blue

Desert Tan

Beige

Light Gray

Charcoal Gray

Light Blue

Brown

Green

Khaki Tan

Black

White

Clear

How to Apply The ArmorPoxy II - Super Heavy Duty Industrial Grade 2 Part Epoxy Coating